Riso Printer ComColor FT 5430

Riso Printer ComColor FT 5430

Main characteristics of  RISO DETAKO  FT5430

Device type	Linear inkjet printer
Printheads	Piezoelectric elements, CMYK, 11 levels of gray
Type of paint	Oil-based pigment paint (blue / purple / yellow / black)
Scan resolution	Standard: 600 dpi × 600 dpi
Print permission	Standard: 300 dpi × 300 dpi
	Line smoothing: 300 dpi × 600 dpi (equivalent)
Warm-up time	2 min 30 sec. (at a room temperature of 20ºC)
Time to first copy	Less than 5 seconds * 1 (when copying A4 landscape)
Print speed * 2 * 6	A4 portrait - One-sided: 140 ppm; duplex: 65 sheets / min
Standard tray	Maximum: 340 mm × 550 mm
	Minimum: 90 mm × 148 mm
Sealed surface	Maximum: 310 mm × 544 mm
Fields * 3	Standard: Field width of 5 mm
	Minimum: Field width from 3 mm
Paper density	Standard tray - 46 - 210 g / m2 (standard paper)
Feed tray capacity	Standard tray - Foot height up to 110 mm.
Output tray	Standard - Height of the foot up to 60 mm.
Page description language	REVIEW / CIII
Supported protocols	TCP / IP, HTTP, HTTPS (SSL), DHCP, ftp, lpr, IPP, SNMP, port 9100 (RAW port), IPv4, IPv6, IPsec
Supported operating systems	Microsoft® Windows® Vista (32-bit / 64-bit), Windows® 7 (32-bit / 64-bit), Windows® 8.1 (32-bit / 64-bit), Windows® 10 (32-bit / 64-bit) -bit) -bit), Windows Server® 2008 (32-bit / 64-bit), Windows Server® 2008 R2 (64-bit), Windows Server® 2012 (64-bit)
Network interface	Ethernet 1000BASE-T, 100BASE-TX, 10BASE-T
The amount of memory	4 GB
Hard disk capacity * 4	500 GB
Available	430 GB
Operating System	Linux
Power supply	AC 100-240 V, 10-5 A, 50-60 Hz
Energy consumption	Maximum 1000 W.
	Standby mode * 5: 150 W.
	Sleep mode * 7: 5 W.
	Power saving mode: 0.5 W.
Noise level	Max. 65 dB (without optional components)
Working conditions	Temperature: from 15ºC to 30ºC
	Humidity: from 40% to 70% (without condensate)
Dimensions (W × D × H)	In operation: 1,030 mm × 725 mm × 1,115 mm
	With closed trays: 775 mm × 705 mm × 970 mm
Required space (W × D × H)	With open trays: 1,305 mm × 1,215 mm × 1,115 mm
Weight	About 132 kg.
	* 1 Within 10 minutes after the last print job
	* 2 When using plain paper (85 g / m2) and medium print brightness
	* 3 Fields of envelope printing - 10 mm.
	* 4 At the rate of one gigabyte = one billion bytes
	* 5 Not at the time of printing
	* 6 Print speed depends on the connected components.
	- Multifunctional finisher: max. 90 pages (A4 portrait, one-sided).
	- Stapler tray with division of circulations: max. 90 pages (A4 portrait, one-sided)
	* 7 When [Power Consumption (Sleep)) is set to [Low]

№ articles	Article description	Notes
	Kit
S-8908W	ComColor FT 5430 printer	High speed color office printer. Print speed 140 pages per minute Print size A3. Front trays are provided. The GDI print controller is preinstalled. Does not work without the S-9285W authentication key
S-8910W	CC FW 5430 CONTROL CARD SET	Electronic identification key.
	Scanner
S-7341G	SCANNER HS7000	High-speed, simultaneous two-way scanning. Does not work without S-7342.
S-7342	SCANNER SUPPORT FG10	Stand for HS700.
	Additional printing optimization devices
S-7394	PS FG10 kit	Map of the integrated Post Script interface.
S-7371G	RS1100C	Adobe PS3 software RIP Installed on a computer selected and purchased by the end customer yourself.
	Additional connecting devices
S-7357	OPTION PCB FG10	Board for connecting accessories. Installed on S-7350EAC and S-4853, once.
S-7395	INSTRUCTIONS FOR READING PAPER F10	Device for connecting additional output trays and devices.
	Additional feeders
S-3451	Card set	Set of devices for feeding thick paper and cardboard (100-400 g / m2).
S-3452	Envelope feed set	A set of devices for feeding envelopes.
	Additional receiving trays and devices
S-7346G	FINISHER FACE DOWN F10	The receiving tray is imprinted down with the functions of division of circulation and coupling.
S-8918	MULTIFUNCTION FINISHER FG20 2 / 4H	Multifunctional finisher. S-7395 and S-7357 are required for installation.
S-8922	FOLDER FG20	Folding unit for S-7350EAC. Z and C folding.
S-8916	Optional 2000 FG20 sheet feeder	Automatic feeder 2000 A4 sheets
S-4853	Drain tray with automatic control	Automatic receiving tray (face up). S-7395 and S-7357 are required for installation.
C-3370	WIDE TRAY	Wide receiving tray (face down). S-7395 is required for installation.
	Consumables for the ComColor FT printer
S-8929E	Paint COMCOLOR FT black	The paint is black.
S-8930E	Paint COMCOLOR FT blue	Paint blue
S-8931E	COMCOLOR FT purple paint	The paint is purple
S-8932E	COMCOLOR FT paint yellow	The paint is yellow
	Consumables for additional devices
S-6685	ComColor Staple 50 clips (G)	For FACEDOWN OFFSET STAPLER (G). (15,000 in a box).
S-9453	CC Staple 100 15,000 pcs / box	Brackets for multifinisher (15,000 in a box).
S-9454	CC Staple Booklet 20,000 pieces / box	Brackets for multifinisher (20,000 in a box).

1. When ordering, specify all the components of the kit you need.
	2. OPTION PCB FG10 (S-7357), INSTALLED ONLY ONCE.
	3. Paint is not included and is ordered separately.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: