Riso Printer ComColor GD 9631

Riso Printer ComColor GD 9631

Device type	Linear inkjet printer
Printheads	Piezoelectric elements, CMYK + gray, 12-level gray scale
Type of paint	Oil-based pigment paint (CMYK: cyan, magenta, yellow, black, gray)
Scan resolution	600 dpi, 400 dpi, 300 dpi, 200 dpi,
Print permission	Standard: 300 dpi × 300 dpi, black 600 dpi × 600 dpi
	Improved: 300 dpi × 600 dpi, black 600 dpi × 600 dpi
	Line smoothing: 600 dpi × 600 dpi (equivalent)
Warm-up time	2 min 30 sec. (at a room temperature of 20ºC)
Time to first copy	Less than 5 seconds * 1 (for color copying A4 landscape)
A4 landscape	One-sided: 130 ppm; duplex: 65 ppm (130 ppm)
A4 portrait	One way: 104 ppm; duplex: 52 ppm (104 ppm)
B4 portrait	One way: 102 ppm; duplex: 44 sheets per minute (88 ppm)
A3 portrait	One way: 78 ppm; duplex: 38 ppm (76 ppm)
Standard tray	Maximum: 340 mm × 550 mm
	Minimum: 90 mm × 148 mm
Front trays	Maximum: 297 mm × 432 mm
	Minimum: 182 mm × 182 mm
Sealed surface	Maximum: 314 mm × 548 mm
Fields * 3	Standard: Field width of 3 mm
	Minimum: Field width from 1 mm
Standard tray	46 - 210 g / m2 (standard paper)
Front trays	-
Standard tray	Height of feet up to 110 mm.
Front trays	-
Output tray	Standard - Height of the foot up to 60 mm.
Page description language	RISORINC / C IV
Supported protocols	TCP / IP, HTTP, HTTPS (SSL), DHCP, ftp, lpr, IPP, SNMP, port 9100 (RAW port), IPv4, IPv6, IPsec
Supported operating systems	Microsoft® Windows® Vista (32-bit / 64-bit), Windows®7 (32-bit / 64-bit), Windows®8.1 (32-bit / 64-bit), Windows®10 (32-bit / 64-bit) -bit) -bit), Windows Server® 2008 (32-bit / 64-bit), Windows Server® 2008 R2 (64-bit), Windows Server® 2012 (64-bit), Windows Server® 2012 R2 (64-bit) bit), Windows Server® 2016 (64-bit version)
Network interface	Ethernet 1000BASE-T, 100BASE-TX, 10BASE-T
The amount of memory	4 GB
Volume	500 GB
Available	About GB
Operating System	Linux
Power supply	AC 100-240 V, 10-5 A, 50-60 Hz
Energy consumption	Maximum 1200 W.
	Standby mode * 5: 150 W.
	Sleep mode * 7: 4 W.
	Power saving mode: 0.5 W.
Noise level	Max. 66 dB (without optional components)
Working conditions	Temperature: from 15ºC to 30ºC
	Humidity: from 40% to 70% (without condensate)
Dimensions (W × D × H)	In operation: 1,220 mm × 725 mm × 1,160 mm
	With closed trays: 1,160 mm × 705 mm × 1,015 mm
Required space (W × D × H)	With open trays: 1,220 mm × 1,240 mm × 1,160 mm
Weight	About 175 kg.
* 1 Within 10 minutes after the last print job  * 2 When using plain paper (85 g / m2) and medium print brightness (3)  * 3 Fields of envelope printing - 10 mm.  * 4 At the rate of one gigabyte = one billion bytes  * 5 Not at the time of printing  * 6 Print speed depends on the connected components. - Multifunctional finisher: max. 120 ppm (A4 landscape, one-sided). - Stapler tray with circulation distribution: max. 150 ppm (A4 landscape, one way)  * 7 When [Power Consumption (Sleep)) is set to [Low]

№ articles	Article description	Notes
	Set 1
S-7237W	ComColor GD 9631 printer	High-speed full-color full-color printer. Print speed 160 pages per minute Print size A3. Pre-installed front feed trays. The GDI print controller is preinstalled. Does not work without the S-7364W identification key.
S-7364W	GD 9630 MANAGEMENT CARD SET	Electronic identification key.
S-7347	TRAY FACE DOWN G10	Receiving tray imprinted down.
	Set 2
S-7237W	ComColor GD 9631 printer	High-speed full-color full-color printer. Print speed 160 pages per minute Print size A3. Pre-installed front feed trays. The GDI print controller is preinstalled. Does not work without the S-7364W identification key.
S-7364W	GD 9630 MANAGEMENT CARD SET	Electronic identification key.
S-7348G	FINISHER FACE DOWN G10	Receiving tray imprinted down with the functions of division of circulation and coupling.
	Scanner
S-7341G	SCANNER HS7000	High-speed, simultaneous two-way scanning. Does not work without S-7342.
S-7342	SCANNER SUPPORT FG10	Stand for HS700.
	Additional printing optimization devices
S-7394	PS FG10 kit	Map enable PS RIP.
S-7371G	RS1100C	Adobe PS3 software RIP Installed on a computer selected and purchased by the end customer yourself.
S-7358	COMCOLOREXPRESS FS2000C	EFI-Fiery print server and RIP Adobe PS3.
	Additional connecting devices
S-7357	OPTION PCB FG10	Board for connecting accessories. Installed on S-7350EAC and S-4853, once.
S-7356	G10 PAPER PUBLISHING INSTRUCTIONS	Device for connecting additional output trays and devices.
	Additional feeders
S-3451	Card set	Set of devices for feeding thick paper and cardboard (100-400 g / m2).
S-3452	Envelope feed set	A set of devices for feeding envelopes.
S-7343G	High Capacity Feeder G10	Loading up to 4000 sheets (80g / m2).
	Additional receiving trays and devices
S-7350EA	MULTIFUNCTION FINISHER FG10 2 / 4H	Multifunctional finisher. S-7356 G10 and S-7357 are required for installation.
S-7352	FOLDER BLOCK FG10	Folding unit for S-7350EA. Z and triple folding.
S-7349G	HIGH-TABLE STABLE G10	Accepts up to 4000 sheets (80g / m2). Can sort printed tasks by shifting them from each other. S-7356 is required for installation
S-7354EAC	Thermobinding device PERFECT BINDER G10 (200)	Thermobinding device. S-7356 is required for installation
S-7355EAC	WRAPPING ENVELOPE FINISHER G10 (E) converter	Converter device. S-7356 is required for installation
S-4853	Drain tray with automatic control	Automatic receiving tray (face up). S-7356 and S-7357 are required for installation.
C-3370	WIDE TRAY	Wide receiving tray (face down). S-7356 is required for installation.
	Consumables for  the ComColor GD printer
S-7280E	Paint ComColor GD INK (E) Black	The paint is black.
S-7281E	Paint ComColor GD INK (E) Cyan	Cyan paint (bright blue)
S-7282E	Paint ComColor GD INK (E) Magenta	Magenta paint (thick red)
S-7283E	Paint ComColor GD INK (E) Yellow	Yellow paint
S-7284E	Paint ComColor GD INK (E) Gray	Paint Gray
	Consumables for additional devices
S-6685	ComColor Staple 50 clips (G)	For FACEDOWN OFFSET STAPLER (G). (15,000 in a box).
S-4129	HC Staple 100 15,000 pcs / box	Brackets for multifinisher (15,000 in a box).
S-4130	HC Staple Booklet 20,000 pieces / box	Brackets for multifinisher (20,000 in a box).
S-6768	PERFECT ADHESIVE SHEET	Glue for PERFECT BINDER, 1 roll. Consumption: A4 50 sheets (100 pages) - 600 books.
S-6769	PERFECT PRIMARY BINDING FILTER	Dust filter, set of 6 pieces. Consumption per 1 piece: A4 50 sheets (100 pages) - 1200 books
S-6770	PERFECT SECOND BINDING FILTER	Odor filter. Consumption per 1 piece: A4 50 sheets (100 pages) - 7200 books
1. When ordering, specify all the components of the kit you need.  2. OPTION PCB FG10 (S-7357), INSTALLED ONLY ONCE.  3. Paint is not included and is ordered separately.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: