Riso Printer ComColor FT 5230

Main characteristics of  RISO DETAKO  FT5230

Device type Linear inkjet printer
Printheads Piezoelectric elements, CMYK, 11 levels of gray
Type of paint Oil-based pigment paint (blue / purple / yellow / black)
Scan resolution Standard: 600 dpi × 600 dpi
Print permission Standard: 300 dpi × 300 dpi
  Line smoothing: 300 dpi × 600 dpi (equivalent)
Warm-up time 2 min 30 sec. (at a room temperature of 20ºC)
Time to first copy Less than 5 seconds * 1 (when copying A4 landscape)
Print speed * 2 * 6 A4 portrait - One-sided: 120 ppm; duplex: 60 sheets / min
Standard tray Maximum: 340 mm × 550 mm
  Minimum: 90 mm × 148 mm
Sealed surface Maximum: 310 mm × 544 mm
Fields * 3 Standard: Field width of 5 mm
  Minimum: Field width from 3 mm
Paper density Standard tray - 46 - 210 g / m2 (standard paper)
Feed tray capacity Standard tray - Foot height up to 110 mm.
Output tray Standard - Height of the foot up to 60 mm.
Page description language REVIEW / CIII
Supported protocols TCP / IP, HTTP, HTTPS (SSL), DHCP, ftp, lpr, IPP, SNMP, port 9100 (RAW port), IPv4, IPv6, IPsec
Supported operating systems Microsoft® Windows® Vista (32-bit / 64-bit), Windows® 7 (32-bit / 64-bit), Windows® 8.1 (32-bit / 64-bit), Windows® 10 (32-bit / 64-bit) -bit) -bit), Windows Server® 2008 (32-bit / 64-bit), Windows Server® 2008 R2 (64-bit), Windows Server® 2012 (64-bit)
Network interface Ethernet 1000BASE-T, 100BASE-TX, 10BASE-T
The amount of memory 4 GB
Hard disk capacity * 4 500 GB
Available 430 GB
Operating System Linux
Power supply AC 100-240 V, 10-5 A, 50-60 Hz
Energy consumption Maximum 1000 W.
  Standby mode * 5: 150 W.
  Sleep mode * 7: 5 W.
  Power saving mode: 0.5 W.
Noise level Max. 65 dB (without optional components)
Working conditions Temperature: from 15ºC to 30ºC
  Humidity: from 40% to 70% (without condensate)
Dimensions (W × D × H) In operation: 1,030 mm × 725 mm × 1,115 mm
  With closed trays: 775 mm × 705 mm × 970 mm
Required space (W × D × H) With open trays: 1,305 mm × 1,215 mm × 1,115 mm
Weight About 132 kg.
  * 1 Within 10 minutes after the last print job
  * 2 When using plain paper (85 g / m2) and medium print brightness
  * 3 Fields of envelope printing - 10 mm.
  * 4 At the rate of one gigabyte = one billion bytes
  * 5 Not at the time of printing
  * 6 Print speed depends on the connected components.
  - Multifunctional finisher: max. 90 pages (A4 portrait, one-sided).
  - Stapler tray with division of circulations: max. 90 pages (A4 portrait, one-sided)
  * 7 When [Power Consumption (Sleep)) is set to [Low]
№ articles Article description Notes
  Kit   
S-8908W ComColor FT 5230 printer High-speed black and white office-class printer. Print speed 140 pages per minute Print size A3. Front trays are provided. The GDI print controller is preinstalled. Does not work without the S-9285W authentication key
S-8911W CC FW 5230 CONTROL CARD SET Electronic identification key.
  Scanner   
S-7341G SCANNER HS7000  High-speed, simultaneous two-way scanning. Does not work without S-7342.
S-7342 SCANNER SUPPORT FG10  Stand for HS700.
  Additional printing optimization devices  
S-7394 PS FG10 kit  Map of the integrated Post Script interface.
S-7371G RS1100C Adobe PS3 software RIP
Installed on a computer selected and purchased by the end customer yourself.
  Additional connecting devices   
S-7357 OPTION PCB FG10  Board for connecting accessories. Installed on S-7350EAC and S-4853, once.
S-7395 INSTRUCTIONS FOR READING PAPER F10  Device for connecting additional output trays and devices.
  Additional feeders   
S-3451 Card set Set of devices for feeding thick paper and cardboard (100-400 g / m2).
S-3452 Envelope feed set A set of devices for feeding envelopes.
 

Additional receiving trays and devices

 
S-7346G FINISHER FACE DOWN F10  The receiving tray is imprinted down with the functions of division of circulation and coupling.
S-8918 MULTIFUNCTION FINISHER FG20 2 / 4H  Multifunctional finisher. S-7395 and S-7357 are required for installation.
S-8922 FOLDER FG20  Folding unit for S-7350EAC. Z and C folding. 
S-8916 Optional 2000 FG20 sheet feeder Automatic feeder 2000 A4 sheets
S-4853 Drain tray with automatic control  Automatic receiving tray (face up). S-7395 and S-7357 are required for installation.
C-3370 WIDE TRAY Wide receiving tray (face down). S-7395 is required for installation.
  Consumables for the ComColor FT printer  
S-8929E Paint COMCOLOR FT black The paint is black.
S-8930E Paint COMCOLOR FT blue
Paint blue
S-8931E COMCOLOR FT purple paint The paint is purple
S-8932E COMCOLOR FT paint yellow The paint is yellow
  Consumables for additional devices  
S-6685  ComColor Staple 50 clips (G) For FACEDOWN OFFSET STAPLER (G). (15,000 in a box).
S-9453 CC Staple 100 15,000 pcs / box Brackets for multifinisher (15,000 in a box).
S-9454 CC Staple Booklet 20,000 pieces / box Brackets for multifinisher (20,000 in a box).
1. When ordering, specify all the components of the kit you need. 
  2. OPTION PCB FG10 (S-7357), INSTALLED ONLY ONCE. 
  3. Paint is not included and is ordered separately.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: